SMS Fittings

An SMS connection is composed of an SMS-13R round nut, an SMS-14 plain liner, an SMS-15 threaded male and a gasket. The SMS -14 plain liner has a flat face while the SMS-15 threaded male is profiled to fit the flat gasket. This design minimizes product entrapment which is very important for hygienic applications such as in the dairy and beverage industries. These connections are particularly useful in flow diverter panels.

SMS fittings are made from both T-304 and T316L stainless steel. Sizes are DN25 (1"), DN38 (1.5"), DN51 (2"), DN63.5 (2.5"), DN76 (3") and DN101.6 (4"). EPDM, Silicone and Viton seals are available.

Sanitary Check Valves

CSE Sanitary Check Valves are designed to prevent product backflow for the food, dairy, beverage and pharmaceutical industries. These valves are spring assisted and can be installed either in a vertical or in a horizontal position. They are manufactured from T-316L stainless steel and precision machined to 180 Grit 3A sanitary standards.

Features include clamp assembly for quick disconnection; viton gaskets; full size flow plate with long stem bushing to minimize wear and tear; and electropolished spring.

CSE Sanitary Check Valves have a maximum pressure rating of 10 bar (145 psi). They are available in butt weld ends and Tri-Clamp ends from size 1" up to 4".

Sanitary Elbow, Tee & Reducer Fittings

* Constructed from both T-304 and T-316L stainless steel.

* Available with butt weld ends and Tri-Clamp ends.

* Polished 180 grit O.D. and I.D. to 3A sanitary standards. Other finishes are available upon request.


* Fittings in the 1/2" - 3" size manufactured in 16 gauge (.065") wall thickness.

* Fittings in the 4" size manufactured in 14 gauge (.083") wall thickness.

Sanitary Clamp Fittings

Tri-Clamp connections are designed to easily assemble or disassemble your lines for maintenance and Cleaning In Place (CIP). It is a quick-couple assembly with a gasket, two ferrules and a clamp.

These sanitary fittings are manufactured from both T-304 and T-316L stainless steel. Each ferrule is designed and polished ID and OD to meet 3A sanitary standards for Clean In Place (CIP).

Elbow, tees, reducers and valves are available with Tri-Clamp connections. They are made in a range of sizes from 1/2" through 4".

Gaskets are available in sizes from 1/2" to 4" in Buna, EPDM, Silicone, Teflon and Viton.